55 years of
Service Promise service

ME3000S Standard Marking Machine

The ME3000S is suitable for applications where the information to be marked does not change often as marking settings cannot be stored. It does have a timer to enable consistent marks to be produced on each component. See the ME3000T for additional features and versatility.

  • Oxide or below surface etch marking.
  • Timer controlled from 1-10 seconds or manual control for continuous output.
  • Can be used with ME3000P Air Jig for semi-automatic marking.
  • Manual marking mode for fast marking of very large images.
  • 3 voltage settings with LED indicator.
  • Electronic overload/reset function.
  • 10 amp output.
  • 110-230v mains input voltage.

You may just need a standard marking kit but the equipment is modular enabling a wide range of configurations to suit your exact application. It may be that you are using long life photograhic stencils for applications where the information doesn't change but if you need to mark variable information, disposable stencils are a better option (used with stencil printer). Listed below are some of the most popular package options that other customers have chosen.


D800 web      ME3000S Kit with BRSK Stencil Printer

 Ideal for variable information such as incremental numbering with max tape width of 36mm. Single and multi line text. Take a look at the full BRSK printer range here


ME3000S Kit, Enlabel Software, Thermal Stencil Printer

Ideal for variable information such as incremental numbering, data matrix etc with print width of 55mm and 105mm. Software enables custom templates and data to be created or downloaded. Utilises POD disposable stencil paper.


ME3000S Semi-Automatic Model
The ME3000S can also be upgraded to a semi-automatic version using our ME3000P Air Jig. Click here for more information.

Programmable No
Pre-Set programs No
Oxide output Yes
Etch output Yes
*Etch + oxide output No
10 Amp model Yes
20 Amp model No
Voltage output settings 3
Timer ***
LCD display No
Resetable usage counter No
Audible buzzer indicates end of cycle No
Multi-lingual No
Rear accessory socket No
RS232 Interface No
110-230V mains imput voltage Yes
Output delay function for curved surfaces No
Use with Metaletch Air Jigs 
(ME2000P & semi-automatic marking)
Electronic overload/reset function Yes
Continuous output  Yes
Timed output Yes
Complete Kit Weight  
Marking Unit weight  
Dimensions with lid down  
Dimensions with lid up when in use  

Kit Weight & Dimensions

Complete kit weight 11kg
Marking unit weight 4.7kg
Kit dimensions (lid down) 45cm x 26cm x 35cm
Kit dimensions (lid up) 45cm x 34cm x 54cm

Kit Contents List

  • One HM hand marking head with a pack of x10 spare felt pads
  • Cordset
  • Earthplate
  • 1.6 amp x 20mm fuse for 220-240v use
  • Footswitch
  • Mains cable with plug
  • X5 125ml bottles of electrolyte of your choice - ME3, ME5, ME6, MN1, MN2
  • Housed in a wooden kit box

For Aerospace and Nuclear applications our high purity “MA” electrolytes will be added to the kit instead”.  These are independently lab tested to ensure the purity levels meet the demands of the most stringent Aerospace standards

me3000s standard marking machine me3000s standard marking machine - alternative image a

Make an Enquiry Make an Enquiry